Claas cerex 760 rc round baler
≈ $92,030
At-4755 Zell An Der Pram
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 15888 2...
+49 15888 279050
2.1 m
Austria, At-4755 Zell An Der Pram
Austria, At-4755 Zell An Der Pram
2.1 m
Austria, At-4755 Zell An Der Pram
Austria, At-5274 Burgkirchen
Austria, At-8230 Hartberg
Austria, At-5274 Burgkirchen
2.1 m
Germany, Hamburg
Austria, At-5274 Burgkirchen
2.1 m
Austria, At-8410 Kalsdorf
Austria, At-2700 Wr. Neustadt
Austria, At-8723 Kobenz Bei Knittelfeld
Austria, At-2100 Korneuburg
2.15 m
Germany, Hamburg
2.1 m
Germany, De-26899 Rhede-Brual
Austria, At-5274 Burgkirchen
2.1 m
Germany, Warburg
Austria, At-8551 Wies
Austria, At-4774 Sankt Marienkirchen Bei Schärding
2.4 m
Austria, At-2100 Korneuburg
2.1 m
Germany, Jacobsdorf
Hay making equipment parts
________
Cerex 760 RC;;- Variable Rundballenpresse mit Presskammerdurchmesser 0,90 – 1,60 m;- Presskammerbreite 1,20 m;;MULTIFLOW HD Pickup:;- 5 Zinkenreihen, kurvenbahngesteuert;- Tasträder mit Bereifung ;- Zuführschnecken beidseitig;;Schneidboden PRO:;- Schneidboden hydraulisch gefedert und absenkbar zur Vermeidung von Blockaden;- Bedienung über Terminal inkl. Signal optisch und akustisch;;ROTO CUT Schneidrotor:;- HD-Schneidrotor mit vier spiralförmig angeordneten Zinkenreihen (360°);- Aktiver Ballenstart durch 3 Starterwalzen;- Messer, einzeln gegen Fremdkörper gesichert;;Presskammer:;- 2 Endlosbänder HD mit doppeltem Antrieb;- Aktive Pressdruckregelung;- Ballenrampe;- Permanente Kettenschmierung;- Hydrauliksteckergriffstücke Kennfixx;- ISOBUS-fähig;- Hydraulikvoraussetzungen: 1 x ew und 2 x dw;;Gutfluss;- MULTIFLOW Pickup HD mit Doppelrollenniederh., Aufnahmebr. 2,10 m;- Tasträder für Pickup, pendelnd und manuell klappbar;- ROTO CUT Schneidrotor, 25 Messer, Schwenkboden inkl. Messerrein.;- Messersatz, 25 Stück;- Komfortnetzbindung ROLLATEX XW;- Ballenauswerfer, gerade;;Anhängung;- Kugelkopfanhängung K80, MR;- Universaldeichsel;- Stützfuß, höhenverstellbar;- Einfachweitwinkel-Gelenkwelle mit Nockenschaltkupplung, 6-teilig;- Hydraulik/Elektronik ROTO CUT Schwenkboden, Standard;- Anschluss Traktorhydraulik, metrisch;;Fahrwerk & Bereifung;- Bereifung 620/;- Zweileitungs-Druckluftbremsanlage, bis 40/50 km/h;;Bedienung;- CEMIS 700;- ISOBUS-Kabel, inkl. Zubehör;;Komfort;- Zentralschmieranlage automatisch, elektrisch angesteuert;- Blindmesser, 25 Stück;- Zusätzl. Messersatz, 25 Stück;- Feuchtesensor zur Ermittlung der Materialrestfeuchte;- Elektronikmodul;;Zusatzausstattung;- Gesetzmäßige Ausrüstung MR mit Bremsanlage;- Technische Dokumentation deutsch;- Ohne Geschwindigkeitsaufkleber;- Beleuchtung MR